See what our Experts say about this etrailer Trailer Tongue Lock

• Hitch Receiver and Coupler Trigger Lock Compatible with Toyota Factory Receiver Width
  The 2018 Toyota Tundra factory hitch is built up around the pin so it is wider than usual and will not fit the traditional 2 inch hitch pin like found in # 2848DAT. You will simply need the longer hitch pin. The Trailer Hitch Receiver Lock - Extra Long - Flush Design for 2-1/2" Trailer Hitches # RH5-XL will work well for you and give you adequate space. If you want one that codes to your truck key, you can use the Bolt Lock # BL7023584. If you want the coupler lock as well then you...
  view full answer...
  
• Availability of Coupler Lock With a 5/16 inch Pin Diameter
  A pin with a 1/4 inch diameter, like part # e98886, is standard for coupler locks. Unfortunately there are none that are 1/16 of an inch larger in diameter. If instead you meant that you needed one with a span of 5/8 of an inch then you will want to go with the Master Lock Adjustable Trailer Coupler Lock # 2847DAT which has a 5/8 inch adjustment setting. If you meant that the pin diameter needed to be 5/8 inches then you are looking for part # e98880.
  view full answer...
• What Size Lock Pin Is Needed for the Coupler on the Yakima Rack and Roll Trailer Part # Y08107
  It sounds like you are referring to a coupler latch lock that is used to lock the latching mechanism of the coupler onto the hitch ball. If this is the case then you would want to use a 1/4" diameter pin like part # e98886. I have attached a photo of where this pin will need to be installed on the Yakima Rack and Roll Trailer part # Y08107 for you as well.
  view full answer...
  
• Coupler Lock Recommendation for a Yoke-Style Trailer Coupler
  Hey Ken, thanks for reaching out and for helping out with disaster relief! For your application I recommend picking up the etrailer Surge Brake Coupler Lock which will work well in either the 2" # e98886 or 2-1/2" # e98887 span configuration. This pin has a 1/4" diameter so you just need to verify that the pin hole this needs to fit into will allow the 1/4" dimension and you'll be good to go! Just be sure to select the "keyed alike" option and how many you want prior to checkout, and...
  view full answer...
• What Coupler Locks Will Work on My Atwood AT80051 Coupler?
  Hello Bill, For your Atwood AT80051 coupler I really like the Master Lock 1-7/8", 2", and 2-5/16" Trailer Coupler Lock - Gray - Keyed Alike # ML377KA for when the trailer is not in use. If you have the trailer connected and want to keep it that way, the etrailer Trailer Coupler Latch Lock - 2" Span - 1/4" Diameter - Chrome # e98886 will do the trick. What kind of trailer are you trying to keep safe from Rob B. Blind?
  view full answer...
• Availability of Coupler Lock That Works When Attached to Hitch Ball
  Hey Bogdan! You can use a lock like the etrailer Trailer Coupler Latch Lock # e98886 to keep your coupler secure while hooked up to your 2022 Sierra 1500. However, this really depends on your style of coupler. This can run through a trigger style latch or you may have a pin hole that will allow you to run it through the body of the coupler. Take a look at the pictures below. What kind of coupler do you have?
  view full answer...
• Recommended Trailer Coupler Latch Lock
  Hey Lonnie, welcome back. The 7/8" Span etrailer Trailer Coupler Latch Lock item # e98889 you were looking at is going to be the best style of trailer tongue lock we have that can be keyed alike. We have these in quite a few different spans but they all fit 1/4" pin diameter like the Demco item # DM14793-81 and item # DM14040-95 you purchased this year. I have listed our options below: 2" Span item # e98886 2-1/2" Span item # e98887 2-3/4" Span item # e39PR 3-3/8" Span item # e98888 You...
  view full answer...
• Looking For Surge Brake Coupler Lock With Keyed Alike Option
  Hello Joseph, thanks for reaching out. I do have a potential option for you, but sadly we do not offer a keyed alike option for the etrailer Adjustable Trailer Coupler Latch Lock # e98883, so there would be no way for us to do 20 of them with the same key. We do have a few other similar locks with a keyed alike option. Take a look at the following: - etrailer Surge Brake Coupler Lock - 3-3/8" Span - 1/4" Diameter - Chrome # e98888 - etrailer Surge Brake Coupler Lock - 2-1/2" Span - 1/4"...
  view full answer...
• Is The InfiniteRule Trailer Coupler Lock # IR58FR Available Keyed Alike?
  Currently the InfiniteRule Trailer Coupler Lock # IR58FR is only offered keyed unique. For a keyed alike option you will want to refer to one of our etrailer Locks # e98886 or # e98889 and select keyed alike from the drop down box when placing your order.
  view full answer...
• How to Adjust etrailer Weld-On A-Frame 2-5/16-Inch Coupler # CA5400
  The etrailer Weld-On A-Frame 2-5/16-Inch Coupler, part # CA5400, does not have any adjustment screw to enable you to take up the slack in the fit with your hitch ball. This coupler is produced by a stamping process and this type of manufacturing method will have some slight variances from one unit to another. The 1/4-inch play you find is fairly typical. You can test the security of the attachment at the hitch ball by using your trailer jack to lift the nose of the trailer while the coupler...
  view full answer...
• Recommended Latch Lock for Atwood Coupler on Travel Trailer
  It sounds like you are looking for a latch style lock for the Atwood coupler on your travel trailer. For your trailer, I recommend taking a look at etrailer.com Coupler Lock # e98886. This is an excellent, receiver style lock that features a pin length of 2 inches and a pin diameter of 1/4 inches. Its heavy duty construction will help to prevent both the coupler from releasing from the ball, and also the trailer from being attached to a different ball. The lock is made right here in the...
  view full answer...
• 1/4" Diameter Locking Pins Which Can Be Keyed Alike
  Here is a list of different length 1/4" pin locks we offer which can be keyed alike. 1/2" Long Pin Lock # e98885 7/8" Long Pin Lock # e98890 2" Long Pin Lock # e98886 2-1/2" Long Pin Lock # e98887 3-3/8" Long Pin Lock # e98888 We also have the Adjustable 1/4" Lock # e98883 which can fit from 1/2" to 2-1/2" spans you can get keyed alike as well.
  view full answer...
• Coupler Lock Recommendations for Atwood Trailer Coupler # 80051
  For trailer coupler 80051 you could use a latch lock such as # e98886 or # 2847DAT. These will install at the latch and prevent it from being able to pull up. Another popular lock for this coupler is # 379DAT. This lock has a part that fits inside the coupler where the ball normally would be. This prevents someone from coupling up to the trailer. I have linked videos for all three of the locks above.
  view full answer...
• Keyed Alike Hitch Locks for 2-1/2 Inch Receiver and Trailer Coupler Latch
  Although it isn't sold as a kit, we do offer a hitch lock that's compatible with a 2-1/2 inch receiver and a coupler latch lock that can be keyed alike. For the hitch lock, use # e98881 and # e98886 for the coupler latch lock. On the product page for both items, right above the 'add to cart' button there's a drop-down menu where you can choose the option of a keyed uniquely or keyed alike lock. If you choose the keyed alike option on both locks, they will be keyed alike for the same key. I've...
  view full answer...
  
• Comparing Different Types of Coupler Locks
  We have a variety of locks for your coupler, each with their own applications. If you have a fat lip coupler, I recommend the etrailer Trailer Coupler Lock - Flat Lip, part # e98897. This yellow lock can fit a 2" coupler and is an immediate deterrent as the color quickly grabs attention. The lock has a stem that reaches into the coupler and can't be wiggled free. If you don't have a fat lip coupler but still want a lock that reaches into the coupler, I recommend the EZ Lock Trailer Coupler...
  view full answer...
• Can Reese Trailer Hitch Locks Be Ordered With Specific Key
  There isn't a way to get a Reese hitch lock with a specific key number on it, so the best we can offer are new, keyed-alike trailer hitch locks, depending on if you need a standard hitch receiver lock, a trailer coupler surround style lock, or a trailer coupler latch-style lock. You would just need to select the "Keyed Alike" option on the product page. Trailer Hitch Receiver Lock: - Trailer Hitch Receiver Lock for 1-1/4" Hitches # e98879 - Trailer Hitch Receiver Lock for 2" and 2-1/2"...
  view full answer...
• Availability Of Locking Coupler Pin With 5/16" Diameter
  Hello Davis. The 1/4" pins are the standard for most coupler locks, and unfortunately, we do not offer anything with a 5/16" diameter. A 1/4" pin such as part # e98886, can still be used, but there may be a bit more play than you would like. Another good option for theft deterrent is a universal coupler lock like the Trimax Universal Trailer Coupler Lock # TMX47FR. This will work with the 2" ball and will fit a wide variety of coupler styles up to 4-1/2" wide overall.
  view full answer...
• Coupler Lock Options for Haulmark 24 Foot Trailer
  There are three common trailer ball sizes, 1-7/8, 2 inch or 2-5/16 inch. Less common is the 50mm. The trailer ball size your trailer needs should be stamped into the metal of your coupler somewhere. A trailer coupler lock like the # FA86-0015-318 from Fastway fits most standard, latch or trigger style couplers. Master Lock also offers some nice coupler locks like # ML377KA which fits all 3 sizes of trailer balls. Another option would be a lock like # e98886 that passes through the hole...
  view full answer...
• Can the Reese Tow and Store Lock Kit Be Keyed Alike
  The Reese Tow and Store Lock Kit part # RP7014700 does not have a keyed alike option so there would be no way to obtain multiple kits with the same key unfortunately. However, you could combine any of the etrailer.com locks and they would all come keyed alike so long as you select that option on the product page. I have attached a list of these options for you below. The etrailer.com Trailer Coupler Lock part # e98895 or part # e98897 could be combined with multiple etrailer.com Trailer...
  view full answer...
• Coupler Lock for Atwood 8500 Pound A-Frame Coupler 80101
  For Atwood coupler 80101 a latch lock such as # e98886 will not work. You would need to use a coupler lock such as # FA86-0015-318. Or if you have coupler 80101 then what you could do is use a longer latch lock, # e98888, and put it vertically through the holes behind the latch.
  view full answer...
• What Options Are There For Keyed Alike Trailer Coupler Locks?
  We offer quite a few, and even a few different styles. The Master Lock # ML377KA can be keyed alike by selecting keyed alike right above the add to cart button and ordering however many you're needing. This style goes into the coupler blocking a smaller hitch ball from being able to be inserted often making it a more popular option due to it being more secure. For a pin style like there's the etrailer # e98886, which again can be keyed alike by selecting keyed alike from the menu above...
  view full answer...
• Best Option For Keyed Alike Hitch and Coupler Lock for 2014 Toyota Tundra w/ OEM Trailer Hitch
  We do have an lock for you but the # e98882 isn't compatible with the factory receiver used on the 2014 Tundra and Tacoma. You can confirm this by measuring the width of the receiver tube at the hitch pin hole. If the tube is thicker than 2-5/8 inches, the # e98882 won't work. The # e98881 is longer, and has been proven to work with the OEM Toyota receiver hitch. All of our etrailer.com locks have the keyed alike option on the product description page like part # e98886. Just choose that...
  view full answer...
  
• Where Is the Span of the etrailer.com Coupler Lock Measured
  The span of the etrailer.com Coupler Lock # e98886 is measured from the lock piece to the stub. I have attached a photo showing this measurement for you, as well as a product review video.
  view full answer...
  
• Keyed-Alike Locks Similar to Master Lock Coupler Latch Lock 2847DAT
  We cannot control or select the key code for Master Lock Coupler Latch Lock # 2847DAT but we do have similar latch locks that can be ordered keyed alike although these do cost more than standard locks. Lock # e98888 has a 3-3/8-inch span and # e98886 has a 2-inch span; both can be ordered keyed alike by selecting that option before you add them to your cart. We also have BOLT brand locks that can be coded to use your vehicle's ignition key instead of their own keys. For instance, lock...
  view full answer...

Do you have a question about this Trailer Tongue Lock?